REAL PLUMBERS ® NETWORK

Please be sure to place item(s)in the shopping cart before checking out

Questions? Call 877-567-2001 or 301-567-4718

REAL PLUMBERS stocks thousands of products. Thanks for waiting while we search the database


Quantity
Picture
 Description Price
Enter Quantity

Item # 505280
CENTURION
"CONDENSING UNIT PAD 24 X 24 X 2

 HVAC/R
High impact, thermoplastic design
24" x 24" x 2"
Condenser
$ 22.69 per EA
1 per package
7 lbs
Enter Quantity

Item # 505282
CENTURION
"CONDENSING UNIT PAD 24 X 36 X 2

 HVAC/R
High impact, thermoplastic design
24" x 36" x 2"
Condenser
$ 23.74 per EA
1 per package
10.5 lbs
Enter Quantity

Item # 488908
CENTURION
LP CONV KIT 120K 90% FURN

 HVAC/R
Aluminized steel primary heat exchanger Stainless steel secondary heat exchanger Integrated control module for easy servicing Blower-off delay for cooling SEER improvement Built-in, high level self-diagnostics with fault code display Integrated control module for reliable, economical operation Top intake and vent connection allows installation in narrow locations Electronic hot surface ignition Induced combustion system with inshot main burners for quiet, efficient operation 100% shut off main gas valve for extra safety PSC - multiple speed, direct drive motor with large, quiet blower 24V, 40VA, fuse protected, control transformer and blower relay supplied for easy installation of add-on cooling Timed on, adjustable off blower capability for maximum comfort

Heater
Gas
$ 24.11 per EA
1 per package
1.25 lbs
Enter Quantity

Item # 607711

CENTURION 1P SMALL RTRY DIM 600W WH




$ 25.74 per EA
1 per package
0.61 lbs
Enter Quantity

Item # 505290
CENTURION
"30" X 40" X 2" A/C CONDENSER PAD

HVAC/R
High impact, thermoplastic design
30" x 40" x 2"
Condenser
$ 31.24 per EA
1 per package
15 lbs
Enter Quantity

Item # 493910
CENTURION
TXV 3.5 - 5.0 TON, DANFOSS

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
BOX
Coil
$ 37.11 per EA
1 per package
1.03 lbs
Enter Quantity

Item # 607716

CENTURION 3-WAY SM RTRY DIM 600W WH




$ 38.73 per EA
1 per package
0.65 lbs
Enter Quantity

Item # 607712

CENTURION 1P SML RTRY DIMR 1000W WH




$ 48.99 per EA
1 per package
0.65 lbs
Enter Quantity

Item # 607717

CENTURION 3WAY SM RTRY DIM 1000W WH




$ 65.49 per EA
1 per package
0.69 lbs
Enter Quantity

Item # 495111
CENTURION
HT STRIP 5KW 1-230 PKG UNIT

 HVAC/R
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
5KW,BOX
Air Conditioner
$ 72.49 per EA
1 per package
5.65 lbs
Enter Quantity

Item # 495112
CENTURION
NEW HT STRIP 7KW 1-230 PKG UNIT

 HVAC/R
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports

Air Conditioner
$ 89.99 per EA
1 per package
7 lbs
Enter Quantity

Item # 607714

CENTURION 1P LG RTRY DIMR 1500W WHT




$ 91.79 per EA
1 per package
0.86 lbs
Enter Quantity

Item # 607715

CENTURION 1P LG RTRY DIMR 2000W WHT




$ 110.35 per EA
1 per package
0.86 lbs
Enter Quantity

Item # 524023
CENTURION
HEAT KIT 15KW 1-230 W/BRKR

 HVAC/R
Air handlers are shipped ready to install in an upflow or right hand horizontal position If the unit needs left hand horizontal or downflow installation, evaporator coil must be repositioned Coil fins are coated with MicroBlue™ Hydrophili coating to enhance the removal of condensation during refrigeration cycle and reduce the possibility of water blow-off Cabinets are thermally insulated with foil faced insulation to prevent sweating

Air Conditioner
$ 124.99 per EA
1 per package
8.1 lbs
Enter Quantity

Item # 495114
CENTURION
HT STRIP 15KW 1-230 PKG UNIT

 HVAC/R
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
15KW,BOX
Air Conditioner
$ 131.25 per EA
1 per package
8.7 lbs
Enter Quantity

Item # 495115
CENTURION
HT STRIP 20KW 1-230 PKG UNIT

 HVAC/R
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
20KW (FOR 4.0 AND 5.0 UNITS ONLY),BOX
Air Conditioner
$ 158.75 per EA
1 per package
8 lbs
Enter Quantity

Item # 518151
CENTURION
EVAP COIL 2.0T 14" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.

Coil
$ 238.75 per EA
1 per package
56 lbs
Enter Quantity

Item # 518153
CENTURION
EVAP COIL 2.5T 14" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.

Coil
$ 257.50 per EA
1 per package
56 lbs
Enter Quantity

Item # 518154
CENTURION
EVAP COIL 2.5T 17" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3/4",3/8",2.5
Coil
$ 268.75 per EA
1 per package
56 lbs
Enter Quantity

Item # 518155
CENTURION
EVAP COIL 3.0T 14" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.

Coil
$ 285.00 per EA
1 per package
64 lbs
Enter Quantity

Item # 518156
CENTURION
EVAP COIL 3.0T 17" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3/8",7/8",3.0
Coil
$ 296.25 per EA
1 per package
65 lbs
Enter Quantity

Item # 518157
CENTURION
EVAP COIL 3.0T 21" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3/8",7/8",3.0
Coil
$ 296.25 per EA
1 per package
65 lbs
Enter Quantity

Item # 518158
CENTURION
EVAP COIL 3.5T 17" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3/8",7/8",3.5
Coil
$ 303.75 per EA
1 per package
72 lbs
Enter Quantity

Item # 518159
CENTURION
EVAP COIL 3.5T 21" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3/8",7/8",3.5
Coil
$ 303.75 per EA
1 per package
72 lbs
Enter Quantity

Item # 518160
CENTURION
EVAP COIL 4.0T 21" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3/8",7/8",4.0
Coil
$ 320.00 per EA
1 per package
82 lbs
Enter Quantity

Item # 488008
CENTURION
GAS FURN 50K/3.0T 80% MULTI

 HVAC/R
Patented Clam Tube™ heat exchanger Clean burning in-shot burners Hot surface ignition 4-position upflow models allow horizontal-left, horizontal-right and downflow applications 3-position 150 MBH input model allows upflow horizontal-left and horizontal-right application Integrated control module for simplicity and reliable, economical operation Built-in self-diagnostics with fault code display 100% shut off main gas valve for added safety Rollout safety control Low unit amp requirement for easy application High quality inducer motor for quiet operation 40 VA, fuse protected control transformer Terminals for controlling humidifiers and EACs Easy to connect power and control wiring Cooling blower relay supplied for easy installation of add-on cooling Blower off-delay for cooling SEER improvement Multi-speed PSC, direct drive blower motors to match cooling requirements Adjustable fan-off settings to eliminate "cold-blow" Compact 31-1/2" height allows installation in small space confines All models are propane convertible (except LoNox models) Available in LoNox models to meet specific area requirements
50,000,1200,17-1/2",BOX
Heater
$ 365.00 per EA
1 per package
120 lbs
Enter Quantity

Item # 488031
CENTURION
NEW GAS FURN 40K/3 80% UP/HORIZ
Electronic hot surface ignition Employ induced combustion Built-in self diagnostics with fault code display 100% shut off main gas valve for extra safety PSC multi-speed motor High heat tubular heat exchanger Terminals for controlling humidifiers and electronic air cleaners Models are not approved for LoNox applications Easily applied in upflow, horizontal left or right with no conversion necessary
40,000,32,000,1200,14-1/2",13-1/4",4"
$ 395.00 per EA
1 per package
95 lbs
Enter Quantity

Item # 488091
CENTURION
AIR HNDLR 2.0T 1-PC MULTI-POS W/HORZ-P

 HVAC/R
Air handlers are shipped ready to install in an upflow or right hand horizontal position If the unit needs left hand horizontal or downflow installation, evaporator coil must be repositioned Coil fins are coated with MicroBlue™ Hydrophili coating to enhance the removal of condensation during refrigeration cycle and reduce the possibility of water blow-off Cabinets are thermally insulated with foil faced insulation to prevent sweating

Air Conditioner
$ 423.75 per EA
1 per package
87 lbs
Enter Quantity

Item # 518162
CENTURION
EVAP COIL 5.0T 24" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3/8",7/8",5.0
Coil
$ 432.50 per EA
1 per package
86 lbs
Enter Quantity

Item # 518161
CENTURION
EVAP COIL 4.0T 24" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3/8",7/8",4.0
Coil
$ 443.75 per EA
1 per package
82 lbs
Enter Quantity

Item # 488013
CENTURION
GAS FURN 125K/5.0T 80% MULTI

 Plumbing
Patented Clam Tube™ heat exchanger Clean burning in-shot burners Hot surface ignition 4-position upflow models allow horizontal-left, horizontal-right and downflow applications 3-position 150 MBH input model allows upflow horizontal-left and horizontal-right application Integrated control module for simplicity and reliable, economical operation Built-in self-diagnostics with fault code display 100% shut off main gas valve for added safety Rollout safety control Low unit amp requirement for easy application High quality inducer motor for quiet operation 40 VA, fuse protected control transformer Terminals for controlling humidifiers and EACs Easy to connect power and control wiring Cooling blower relay supplied for easy installation of add-on cooling Blower off-delay for cooling SEER improvement Multi-speed PSC, direct drive blower motors to match cooling requirements Adjustable fan-off settings to eliminate "cold-blow" Compact 31-1/2" height allows installation in small space confines All models are propane convertible (except LoNox models) Available in LoNox models to meet specific area requirements
125,000,2000,24-1/2",BOX
Gas
$ 446.25 per EA
1 per package
150 lbs
Enter Quantity

Item # 518163
CENTURION
EVAP COIL 5.0T 24" MULTI-POS CASED TXV

HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.

Coil
$ 456.25 per EA
1 per package
98 lbs
Enter Quantity

Item # 488092
CENTURION
AIR HNDLR 2.5T 1-PC MULTI-POS W/HORZ-P

 HVAC/R
Air handlers are shipped ready to install in an upflow or right hand horizontal position If the unit needs left hand horizontal or downflow installation, evaporator coil must be repositioned Coil fins are coated with MicroBlue™ Hydrophili coating to enhance the removal of condensation during refrigeration cycle and reduce the possibility of water blow-off Cabinets are thermally insulated with foil faced insulation to prevent sweating

Air Conditioner
$ 488.75 per EA
1 per package
90 lbs
Enter Quantity

Item # 488037
CENTURION
NEW GAS FURN 115K/4 80% UP/HORIZ
Electronic hot surface ignition Employ induced combustion Built-in self diagnostics with fault code display 100% shut off main gas valve for extra safety PSC multi-speed motor High heat tubular heat exchanger Terminals for controlling humidifiers and electronic air cleaners Models are not approved for LoNox applications Easily applied in upflow, horizontal left or right with no conversion necessary
115,000,92,000,1600,21",19-1/4",4"
$ 523.75 per EA
1 per package
156 lbs
Enter Quantity

Item # 488093
CENTURION
AIR HNDLR 3.0T 1-PC MULTI-POS W/HORZ-P

 HVAC/R
Air handlers are shipped ready to install in an upflow or right hand horizontal position If the unit needs left hand horizontal or downflow installation, evaporator coil must be repositioned Coil fins are coated with MicroBlue™ Hydrophili coating to enhance the removal of condensation during refrigeration cycle and reduce the possibility of water blow-off Cabinets are thermally insulated with foil faced insulation to prevent sweating

Air Conditioner
$ 543.75 per EA
1 per package
105 lbs
Enter Quantity

Item # 488094
CENTURION
AIR HNDLR 3.5T 1-PC MULTI-POS W/HORZ-P

 HVAC/R
Air handlers are shipped ready to install in an upflow or right hand horizontal position If the unit needs left hand horizontal or downflow installation, evaporator coil must be repositioned Coil fins are coated with MicroBlue™ Hydrophili coating to enhance the removal of condensation during refrigeration cycle and reduce the possibility of water blow-off Cabinets are thermally insulated with foil faced insulation to prevent sweating

Air Conditioner
$ 611.25 per EA
1 per package
121 lbs
Enter Quantity

Item # 493020
CENTURION
COND UNIT 1.5T 13 SEER

 HVAC/R
Coil constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation Fins on unit protected with a decorative grille Compressor internally protected against high pressure and temperature Cabinet made of pre-painted steel Installation time and costs reduced by easy power and control wiring connections Available in sweat connect models only Unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping Top discharge - warm air from top-mounted fan blown up away from structure and any landscaping Low operating sound level Low maintenance - long life permanently lubricated - motor bearings need no annual servicing Easy service access Secured service valves

Condenser
$ 615.00 per EA
1 per package
151 lbs
Enter Quantity

Item # 488060
CENTURION
NEW GAS FURN 60K/3.0T 90% DN/H

 HVAC/R
Aluminized steel primary heat exchanger Stainless steel secondary heat exchanger Electronic hot surface ignition system Integrated control module for easy servicing Compact, easy to install, ideal height 40" cabinet Blower-off delay for cooling SEER improvement Built-in, high level self-diagnostics with fault code display May be installed as either two pipe (sealed combustion) using outdoor combustion air or single pipe vent (using indoor combustion air) or attic combustion air Induced combustion system with inshot main burners for quiet, efficient operation 100% shut off main gas valve for extra safety PSC - multiple speed, direct drive motor with large, quiet blower 24V, 40VA fuse protected control transformer and blower relay supplied for add-on cooling
600,001,200
Heater
Gas
$ 683.75 per EA
1 per package
140 lbs
Enter Quantity

Item # 488095
CENTURION
AIR HNDLR 4.0T 1-PC MULTI-POS W/HORZ-P

 HVAC/R
Air handlers are shipped ready to install in an upflow or right hand horizontal position If the unit needs left hand horizontal or downflow installation, evaporator coil must be repositioned Coil fins are coated with MicroBlue™ Hydrophili coating to enhance the removal of condensation during refrigeration cycle and reduce the possibility of water blow-off Cabinets are thermally insulated with foil faced insulation to prevent sweating

Air Conditioner
$ 698.75 per EA
1 per package
148 lbs
Enter Quantity

Item # 488061
CENTURION
NEW GAS FURN 80K/3.0T 90% DN/H

 HVAC/R
Aluminized steel primary heat exchanger Stainless steel secondary heat exchanger Electronic hot surface ignition system Integrated control module for easy servicing Compact, easy to install, ideal height 40" cabinet Blower-off delay for cooling SEER improvement Built-in, high level self-diagnostics with fault code display May be installed as either two pipe (sealed combustion) using outdoor combustion air or single pipe vent (using indoor combustion air) or attic combustion air Induced combustion system with inshot main burners for quiet, efficient operation 100% shut off main gas valve for extra safety PSC - multiple speed, direct drive motor with large, quiet blower 24V, 40VA fuse protected control transformer and blower relay supplied for add-on cooling
BOX,1200,80,000
Heater
Gas
$ 711.25 per EA
1 per package
155 lbs
Enter Quantity

Item # 493031
CENTURION
NEW COND UNIT 2.0T 14SEER 1-230

 HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
2.0 TON,3/4",3/8",37.00,27.00,35",209,BOX
Air Conditioner
$ 753.75 per EA
1 per package
227 lbs
Enter Quantity

Item # 493032
CENTURION
NEW COND UNIT 2.5T 14SEER 1-230

 HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
2.5 TON,7/8",3/8",37.00,27.00,39.00,228,BOX
Air Conditioner
$ 791.25 per EA
1 per package
217 lbs
Enter Quantity

Item # 488096
CENTURION
AIR HNDLR 5.0T 1-PC MULTI-POS W/HORZ-P

 HVAC/R
Air handlers are shipped ready to install in an upflow or right hand horizontal position If the unit needs left hand horizontal or downflow installation, evaporator coil must be repositioned Coil fins are coated with MicroBlue™ Hydrophili coating to enhance the removal of condensation during refrigeration cycle and reduce the possibility of water blow-off Cabinets are thermally insulated with foil faced insulation to prevent sweating

Air Conditioner
$ 826.25 per EA
1 per package
155 lbs
Enter Quantity

Item # 493033
CENTURION
NEW COND UNIT 3.0T 14SEER 1-230

 HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3.0 TON,7/8",3/8",37.00,27.00,39.00,219,BOX
Air Conditioner
$ 908.75 per EA
1 per package
217 lbs
Enter Quantity

Item # 493034
CENTURION
NEW COND UNIT 3.5T 14SEER 1-230

 HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3.5 TON,1-1/8",3/8",43.00,32.00,32.00,240,BOX
Air Conditioner
$ 1002.50 per EA
1 per package
263 lbs
Enter Quantity

Item # 493035
CENTURION
NEW COND UNIT 4.0T 14SEER 1-230

 HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy misty-brown finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Permanently lubricated motor needs no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
4.0 TON,1-1/8",3/8",43.00,32.00,38.00,264,BOX
Air Conditioner
$ 1127.50 per EA
1 per package
263 lbs
Enter Quantity

Item # 510031
CENTURION
NEW HEAT PUMP 2.0T 14SEER 1-230

 HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The fins on the unit are protected with a decorative grille. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy earth tone finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Long life permanently lubricated motor bearings need no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
2.0 TON,7/8",3/8",43.00,32.00,26.00,212,BOX
Heater
$ 1173.75 per EA
1 per package
285 lbs
Enter Quantity

Item # 510032
CENTURION
NEW HEAT PUMP 2.5T 14SEER 1-230

 HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The fins on the unit are protected with a decorative grille. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy earth tone finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Long life permanently lubricated motor bearings need no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
2.5 TON,7/8",3/8",43.00,32.00,26.00,215,BOX
Heater
$ 1230.00 per EA
1 per package
308 lbs
Enter Quantity

Item # 510034
CENTURION
NEW HEAT PUMP 3.5T 14SEER 1-230

 HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The fins on the unit are protected with a decorative grille. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy earth tone finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Long life permanently lubricated motor bearings need no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
3.5 TON,1-1/8",3/8",43.00,32.00,32.00,252,BOX
Heater
$ 1332.50 per EA
1 per package
318 lbs
Enter Quantity

Item # 510089
CENTURION
PKG COOLING 2.0T 1-230 13S
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
Package AC,5-7.5-10,2.0 Tons,47.25,49.13,33.50,338


$ 1560.00 per EA
1 per package
338 lbs
Enter Quantity

Item # 510035
CENTURION
NEW HEAT PUMP 4.0T 14SEER 1-230

 HVAC/R
FEATURES: One phase, 230 volt Quality Condenser Coils - The coil is constructed of copper tube and hardened black coated aluminum fins for durability and long lasting efficient operation. The fins on the unit are protected with a decorative grille. Protected Compressor - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of a high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. Durable Finish - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and glossy earth tone finish ensure less fading when exposed to sunlight. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Top Discharge - The warm air from the top-mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Long life permanently lubricated motor bearings need no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls for easy servicing of the unit. Secured Service Valves - Secured reuseable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
4.0 TON,1-1/8",3/8",43.00,32.00,38.00,266,BOX
Heater
$ 1562.50 per EA
1 per package
305 lbs
Enter Quantity

Item # 510085
CENTURION
PKG HEAT PUMP 2.0T 1-230 13S
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
5-7, 5-10,2.0 Tons,47.25,49.13,33.50,353


$ 1585.00 per EA
1 per package
334 lbs
Enter Quantity

Item # 510090
CENTURION
PKG COOLING 2.5T 1-230 13S
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
Package AC,5-7.5-10-15,2.5 Tons,47.25,49.13,33.50,340


$ 1703.75 per EA
1 per package
340 lbs
Enter Quantity

Item # 510091
CENTURION
PKG COOLING 3.0T 1-230 13S
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
Package AC,5-7.5-10-15,3.0 Tons,47.25,49.13,33.50,341


$ 1715.00 per EA
1 per package
341 lbs
Enter Quantity

Item # 510092
CENTURION
PKG COOLING 4.0T 1-230 13S
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
Package AC,10-15-20,4.0 Tons,47.25,49.13,41.50,376


$ 1851.25 per EA
1 per package
376 lbs
Enter Quantity

Item # 510086
CENTURION
PKG HEAT PUMP 3.0T 1-230 13S
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
5-7, 5-10-15,3.0 Tons,47.25,49.13,33.50,388


$ 1873.75 per EA
1 per package
341 lbs
Enter Quantity

Item # 510093
CENTURION
PKG COOLING 5.0T 1-230 13S
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
Package AC,10-15-20,5.0 Tons,47.25,49.13,41.50,456


$ 2206.25 per EA
1 per package
456 lbs
Enter Quantity

Item # 510088
CENTURION
PKG HEAT PUMP 5.0T 1-230 13S
Lower installation cost Convertable air flow design Condensate pan 3/4" condensate drain Durable finish Top discharge Low operating sound 208-230 volt/single phase Factory mounted TXV On site flexibility High operating efficiencies Demand defrost control Simple control circuit Easy service access Secured service access ports
10-15-20,5.0 Tons,50.00,49.13,42.00,495


$ 2211.25 per EA
1 per package
460 lbs

Please be sure to place item(s) in the shopping cart before checking out