Genuine JAY R. SMITH 273-B-120 Surface Mounted Enclosure Singular Electronic Trap Primer 120 Volt
REGULARLY FURNISHED: A surface mount, Floor Drain Trap Priming Device consisting of an Enclosure with Cover, Solenoid Valve, Bronze Air Gap and a Timer (factory preset to discharge once per twenty-four-hour period). This device is supplied with hardwire type electrical connections and has provisions to interface with a Building Management System (BMS) where applicable.
WORKING PRESSURE: • 20 PSI to 100 PSI
Singular electronic trap primers can be used to prime 1, or up to, 4 floor drain traps with optional distribution unit.
All wiring must follow and be in accordance with National, State and Local Electrical Codes. • The trap primer valve must be installed a minimum of 12” above flood level of device being served. Must have a minimum of 12” from bottom of outlet before a 90° elbow can be used. Allow one foot of elevation for every 20 feet of distance ran for floor drain make up line. The makeup line from trap primer to the floor drain must have continuous slope. • The furthest recommended distance from the trap primer to the floor drain is 20′. • Unit must be installed plumb and level and be accessible.
